Premier Series
CR7
Compact Full Range Center For Music and Movies - CR7
The center channel is considered to be the most important
inany surround sound system.The CR7 is a compact center,
tuned and built like all Snell speakers — with smooth tonal
balance,excellent dispersion,and high power handling.This
isessential,since the center has the critical task of
reproducingthe dialogue found on movie soundtracks.
We made the CR7 as small as possible without
compromisingperformance by extruding the cabinet from
solid aluminum —saving 1.5-inches from each dimension.
As a D ’Appolito Array,named for our chief engineer Dr.Joe
D ’Appolito Ph.D.,the CR7 has great articulation and a wide
dispersion angle,making it perfect to handle its center
channel responsibilities.This elegant design serves equally
well as an LCR for the left and right main channels.
When three CR7s are used across the front of a
multichannel system, the result is a seamless, timbre
Dimensions:
18” High
5.75” Wide
7.5” Deep
matched soundstage. Voiced to match Snell speakers.The Frequency Response of the CR7 matches the K7,M7, LCR7
and D7 Tower within +1.dB from 80Hz -20kHz,for seamless left /right pans. Fills a typical listening room. Astonishingly, the
CR7 produces 101dB of continuous output from 12 feet away when used with a 75-Watt amplifier. Bass extension suitable
for all movie soundtracks and music recordings. The CR 7 ’s bass extends to 80Hz (-3dB).
System Suggestions:
Basis 150
SR7 SURROUND
K7
Like all Snell loudspeakers, each CR7 is hand tuned for natural imaging and sonic depth.
Design:
Acoustic Suspension
D'Appolito Array
Woofer
Two 4-inch Copolymer,
4.5mm Excursion
5-way, satin nickel-plated, brass
terminals. Accepts 5/16 - inch
spades, pins, banana plugs and
bare wire to 12 gauge.
Weight
16 lbs.
Frequency Response
Video Shielding
80Hz-20kHz+3dB
Yes
Cabinet Construction
Extruded aluminum 1/8-inch wall
thickness. 1/4-inch baffle. Fully
braced.
Sensitivity
87 dB
Crossover Frequency
2.2
Impedance
Crossover
Nominal 4 Ohms
Discrete Tweeter and Woofer
circuit boards. Time alignment and
coherency are achieved through
the transition region from driver to
driver. Each crossover is
individually tuned by our
technicians to ± 0.5db of the
Master Reference.
End Caps
1/4 - inch aluminum,
anodized black
Maximum Output
105 dB
Grille
Recommended Power
50 Watts minimum
150 Watts maximum
Perforated steel with black
powder-coat paint.
Finishes
Tweeter
1-inch Cloth dome
Wiring
Bi-amp, bi-wire ready
Connections
Satin black powdercoat paint.
Can be ordered in most wood
and paint finishes.
Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.
|